NivometraGrounded in data.
Log in

All states

Snow load data · MS

Ground snow load in Mississippi

Updated July 15, 2026

Mississippi’s snow history is recorded by 191 measurement stations in the federal ERDC/CRREL SR-20-1 dataset, with 5,864 station-years of observations at elevations from 0 to 650 ft. Across the 84 stations with a published 50-year value, estimates range from 1 to 14 psf, with a median of 5 psf.

Highest 50-year estimates in Mississippi

These are the stations with the highest 50-year ground snow load estimates in the state. Each value is a statistical estimate derived from that station’s snow record, not a measured load, and not a design value for any particular address.

StationElevation50-yr estimateYears of record
Mount Pleasant450 ft14 psf37
Tunica190 ft14 psf15
Arkabutla Dam240 ft12 psf34
Independence 3 N360 ft11 psf27
Amory 4 W230 ft10 psf13

Even across Mississippi’s comparatively modest 650 ft elevation spread, estimated values vary from 1 to 14 psf. Local snow climate matters more than any single statewide figure.

What these numbers are

A 50-year ground snow load is the weight of snow on the ground, in pounds per square foot, with a 2% chance of being exceeded in any given year. It is the statistical basis of the ground snow load maps in ASCE 7-16 and earlier building codes, and the form of value their site-specific case studies call for. (ASCE 7-22 moved to strength-level values on a different basis; see what changed in ASCE 7-22.)

The values above are per-station estimates from SR-20-1, the ERDC/CRREL report federal agencies use for site-specific snow load analysis. Each is derived from the snow measurements at that station, so it describes the station’s location, not your address. Between stations, the defensible way to estimate a value is the SR-20-1 case-study method: take the surrounding stations, adjust for elevation, and interpolate.

Getting a value for a specific Mississippi address

If you own a building, your design snow load is set by your local building department; the guide on how much snow a roof can hold explains what the number means for an existing roof.

If you are designing one somewhere the map is coarse or marked for a case study, Nivometra runs the SR-20-1 methodology for an exact location: it selects the relevant surrounding stations, shows you every one on the map with its elevation and record, and documents the interpolation in a report you can hand to a reviewer.

Ground snow load data for all states

This guide is educational content, not engineering advice. Structural decisions for a specific building should be made by a licensed engineer or your local building official.